Roller pan mixer (pan type) has a arrangement of both crushing & mixing various types of materials for eg. Cement, small pieces of aluminum, brass, copper, chemical powder etc. The machine can be mounted on four pneumatic types or can be installed in the factory premises. This mixer can be powered by 7.5h.p. electric motor with starter or 10h.p. air cooled diesel engine.

Product Details :

4.6r.p.m. (Roller Pan Mixer) 150 litres


It has an output of 150 litres (5 cubic feet) per batch or 21/2 cubic meters hourly capacity based on an average of 25 batches per hour.


All welded steel channel fitted with four steel wheels.

Powered By

6.5 H.P. Air Cooled diesel engine/7.5 electric motor.


Roller shaft operated by well protected bevel gear mounted above the pan and readily accessible. Drive from engine to countershaft by roller chain.

Mixing Pan

46 in diameter, all welded sides with reinforcing ring at top to maintain circular shape. One section of the pan removable for easy accessibility and renewable steel lining plates fitted in the bottom.


Each roller fitted with heavy double bushes easily renewable without removing rollers from the pan. The roller, which incorporates renewable hubs, are fitted with grit proof covers, self adjusting for end wear cups.

Mixing Blades

They are adjustable both ways for wear


Through sliding door in the bottom operated by the hand lever through rack and pinion. Height of discharge 1'2".

Approx weight of basic machine

2,140 kg.